Hafele 003.55.004 Titebond, Pro-Grade Plus Caulk

Product Information

• Description

  Manufacturer: Hafele
  Item: 003.55.004
  
  Product Title: Titebond®, Pro-Grade Plus Caulk, Gray
  
  Category: Titebond®, Pro-Grade Plus Caulk,
  
  Item Details …
  
  - APPLICATION GUIDELINES
  
  - Application temperature: Above 40°F
  
  - Coverage (maximum): Approximate length of bead according to bead diameter:
  
  - Container bead: 1/4" bead 10.1 oz cartridge is 31 ft
  
  - Working time: Approx. 10-15 minutes for a 1/4” bead
  
  - Working surfaces:Surfaces to be caulked should be clean, dry and free from excess oil, grease, water, dirt or any other material that may deter excess. Properly designed
  
  - joint not to exceed 1/2" in depth. Cut tip at 45° angle for 1/8" to 1/2" bead and place in professional cartridge gun. Apply caulk into clean joint. If necessary, smooth bead immediately.
  
  - Cleanup: Clean uncured material with water. After curing, excess sealant must be cut or scraped away.
  
  - LIMITATIONS
  
  - Not designed for continuous submersion or use below the
  
  - waterline. Air, caulk and surface temperature should be above
  
  - 40°F. Do not apply if rain is expected within 12 hours. Clear
  
  - sealant will be white during application but will clear within 7-14
  
  - days. Cure time is dependent upon ambient conditions including
  
  - temperature and humidity. The caulk should be dry to the touch
  
  - and ready to paint in 2-4 hours with a water-based (latex) paint
  
  - that does not contain plasticizer. Clear is paintable in 4-6 hours.
  
  - For other paint types, a compatibility test is recommended. It is
  
  - highly recommended to use backing material. For best results,
  
  - store in a dry location at or below 75°F.
  
  - For interior and exterior applications
  
  - Seals joints, repairs cracks and fills gaps
  
  - Paintable with a water based latex paint after application*
  
  - Provides a water-resistant seal
  
  - Tools easily and cleans up with water
  
  - Complies with the following requirements:
  
  - ASTM C834 Type OP Grade -18°C
  
  - ASTM C920 Type S Grade NS Class 25
  
  - Pro-Grade Plus Clear is paintable in 4–6 hours
  
  - Pro-Grade Plus Colors are paintable in 2–4 hours

• Data Sheet

  Detailed Data Sheet

• Product Resources

  Technical data sheet
  
  TCH_Furniture_Cabinetry_Hardware_2022|Page 12.58A
  
  

• Brand PDF Catalogs